Installing The Digital Video Software - Canon Elura 60 - Elura 60 MiniDV Camcorder Instruction Manual

Installing the Digital Video Software

❍ Be sure to install the Digital Video Software before connecting the
camcorder to the computer.
❍ Users of Windows 2000 or Windows XP must first log in as an
Administrator to install programs.
Windows XP Users:
Your digital video camcorder is equipped with the standard Picture
Transfer Protocol (PTP). This protocol enables you to download images by
simply connecting the camcorder to a computer with the USB cable (the
software such as the [Scanner and Camera Wizard] starts automatically).
However, please note that there are several limitations to downloading
images with this method. To avoid these problems, install ZoomBrowser
EX to download images.
❍ It may take a few minutes, after connecting the camcorder, until you
can download images.
❍ Images protected on the camcorder may lose this setting once they are
downloaded to the computer.
1.
Check a camcorder is not connected to the computer.
While a camcorder is connected to the computer, the software cannot be
installed normally. If a camcorder is connected, detach the USB cable from
the computer.
2.
Close any programs that are running.
3.
Set the DIGITAL VIDEO SOLUTION DISK For Windows in the
computer's CD-ROM drive.
• The installer panel opens automatically.
• If the installer panel does not appear automatically, use the following
procedures to display it.
Windows 98/Windows Me/Windows 2000:
1. Double-click the [My Computer] icon.
2. Right-click the CD-ROM icon and select [Open] from the displayed
3. Double-click the [Setup.exe] icon.
Windows XP:
1. Select [My Computer] from the [Start] menu.
2. Right-click the CD-ROM icon and select [Open] from the displayed
menu.
3. Double-click the [Setup.exe] icon.
Depending on the setting of your computer, the file extension ".exe" may
not appear.
12
menu.