Hp Jetdirect Eio Menu - HP Jetdirect 610n Hardware Installation Manual

HP Jetdirect EIO Menu

If your HP EIO printer or multifunction periperhal (MFP) device
has a control panel, you can configure basic network parameters
through the Jetdirect EIO menu on the printer's control panel.
Printers with control panel support include:
HP LaserJet 4000, 4050, 4100, 5000, 8000, 8100, 8150, 9000
Series EIO printers and MFPs
HP Color LaserJet 4500, 4550, 8500, 8550 Series EIO printers
and MFPs
HP Business InkJet 2200/2250 Series EIO printers
HP DesignJet EIO printers
Note
You can use the printer control panel to do the following:
Enable or disable network protocols (TCP/IP, IPX/SPX,
DLC/LLC, AppleTalk)
Configure TCP/IP parameters
Configure IPX frame types
Configure IPX source routing for Token Ring networks
Configure Apple EtherTalk Phase parameters for Ethernet
networks (600N only)
Configure 10/100Base-TX link operation (610N/615N only)
The keystrokes to access the Jetdirect EIO menu from the printer
control panel depends on the printer. Refer to the printer manuals
for instructions to navigate the printer control panel.
The HP Jetdirect internal print servers support the following
printer control panels:
Classic Control Panel
buttons
Graphical Control Panel
keypads (available on newer HP LaserJet printer models)
ENWW
To configure HP Jetdirect parameters on
HP DesignJet printers through the printer's front
control panel, see your HP DesignJet setup guide.
For printers without control panels (for example,
HP LaserJet 2200 Series EIO printers), you must
use HP software or other tools for configuration.
display with menu and parameter selection
display with navigation and numeric
A-29