Setting Up; Power Requirements - Yamaha EZ-220 Owner's Manual

Owner's manual
Hide thumbs Also See for EZ-220:
Table of Contents

Advertisement

Playing the Keyboard

Setting Up

Power requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an
AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not
deplete resources.
 Using an AC Power Adaptor
1 Make sure that the power of the instrument is off
(display is blank, except for notation staff).
WARNING
• Use the specified adaptor (page 54) only. Using the
wrong adaptor can result in damage to the instrument
or overheating.
2 Connect the AC adaptor to the DC IN 12V jack.
3 Plug the AC adaptor into an AC outlet.
CAUTION
• When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trou-
ble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet.
Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When
you are not using the product for a long time, make
sure to unplug the power cord from the wall AC outlet.
2
AC power
 Using Batteries
This instrument requires six "AA" size, Alkaline
(LR6)/Manganese (R6) batteries, or rechargeable
nickel-metal hydride batteries (rechargeable Ni-MH
batteries). The Alkaline batteries or rechargeable Ni-
MH batteries are recommended for this instrument,
since other types may result in poorer battery perfor-
mance.
WARNING
• When using Ni-MH batteries, follow the instructions that
came with the batteries. Use only the specified charger
device when charging.
1 Make sure that the power of the instrument is off
(display is blank, except for notation staff).
10
EZ-220 Owner's Manual
3
AC outlet
adaptor
2 Set the [BATTERY TYPE] switch on the rear panel
to "Ni-MH" or "ALKALINE" depending on the
battery type you are using.
• Rechargeable Ni-MH
batteries
NOTICE
• The rechargeable battery may be damaged or the bat-
tery life may be shortened if you set the [BATTERY
TYPE] switch to a position different from the actual
battery type.
3 Open the battery compartment cover located on the
instrument's bottom panel.
4 Insert the six new batteries, being careful to follow
the polarity markings on the side of the compart-
ment.
5 Replace the compartment cover, making sure that it
locks firmly in place.
NOTICE
• Never connect or disconnect the AC power adaptor
when the batteries are installed and the power is on.
Doing so will turn the power off, and may cause the
settings to be initialized.
• Alkaline batteries
• Manganese batter-
ies

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents