Power Menu; Suspend Mode [Auto]; Acpi 2.0 Support [Enabled]; Acpi Apic Support [Enabled] - Asus M5A78L-M USB3 User Manual

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Configuration and
Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then
press <Enter> to display the configuration options.
Main Advanced
Power Settings
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support

APM Configuration

HW Monitor Configuration
Anti Surge Support
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
2.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
2.5.2

ACPI 2.0 Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) 2.0
support. Configuration options: [Disabled] [Enabled]
2.5.3

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)
support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the
ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
2.5.4 APM Configuration
Restore on AC Power Loss [Power Off]
When this item is set to [Power Off], the system goes into off state after an AC power loss.
When this item is set to [Power On], the system goes on after an AC power loss. When this
item set to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last
State]
Power on From S5 By PME# [Disabled]
Enables or disables PME wake from sleep states. Configuration options: [Disabled] [Enabled]
Power on From S5 By Ring [Disabled]
Enables or disables ring to generate a wake event. Configuration options: [Disabled]
[Enabled]
ASUS M5A78L-M/USB3
M5A78L-M/USB3 BIOS Setup
Power Boot Tools
[Auto]
[Enabled]
[Enabled]
[Enabled]
Exit
Select the ACPI state
used for System
Suspend.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Version 0201
2-17