Problems Sending Faxes - Canon 4204B019AA User Manual

User manual
Hide thumbs Also See for 4204B019AA:
Table of Contents

Advertisement

>
Advanced Guide
Troubleshooting

Problems Sending Faxes

Cannot Send a Fax
Cannot Perform Sequential Broadcasting by Redialing, or Cannot Dial Using the Numeric Buttons
Cannot Send a Fax Clearly
Errors Often Occur When You Send a Fax
Cannot Send a Fax
Check 1: Is the power turned on?
You cannot send faxes if the power is turned off. Press the
on.
If you disconnected the power cord without turning off the power (the Power
lit), reconnecting it turns on the power automatically.
If you disconnected the power cord after pressing the
(the Power lamp is not lit), reconnect it, then press the ON button to turn on the power.
If the power was turned off due to power failure, etc., the power is automatically turned
on when the power failure is resolved.
Check 2: Is the document being sent from memory or the fax being received into
memory?
When the In Use/Memory lamp is flashing, a fax is being sent from/received into memory.
Wait until the transmission/reception is complete.
Check 3: Is the telephone line connected to the External Device Jack?
Reconnect it to the Telephone Line Jack. Refer to your setup manual.
If you still cannot send a fax, there is a problem with the telephone line. Contact your
telephone company and the manufacturer of your terminal adapter or telephone adapter.
Check 4: Is the telephone line type set correctly?
Check the telephone line type setting and change it as necessary.
Confirming the Telephone Line Connection
Check 5: Is Hook key setting set to Disable?
When you send a fax manually, dial the number with Hook key setting set to Enable, or dial the
number using the telephone connected to the machine.
Check 6: Is Dial tone detect set to ON?
Resend the fax after a while. If you still cannot send the fax, set Dial tone detect to OFF.
Dial tone detect
Check 7: Is the fax number registered correctly for speed dialing?
Make sure that the fax number is registered correctly for speed dialing.
.
Registering Recipients for Speed Dialing
Check 8: Does an error occur during transmission?
Check the LCD for an error message.
A Message for Faxing Is Displayed on the LCD
Print the Activity report and check for an error.
Printing the Activity report manually
Check 9: Is the telephone line connected correctly?
> Problems Sending Faxes
button to turn the power
ON
lamp is
ON button to turn off the power

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4204b019Mx340 series

Table of Contents