Document Jams In The Adf - Canon 4204B019AA User Manual

>
Advanced Guide
Troubleshooting

Document Jams in the ADF

Important
When you turn off the machine to remove the jammed document, make sure of the following.
While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off
after receiving the fax. Do not disconnect the power plug while the machine is receiving a fax. If
you disconnect the power plug, all the documents stored in memory are deleted.
If the Stop button is pressed while the machine is scanning the document:
If you press the Stop button during scanning, Document in ADF Press [OK] appears on the LCD.
Press the button so that the remaining document is automatically fed out.
OK
Removing the jammed document from the Document Tray:
Remove the document following the procedure below.
1.
If printing is in progress, press the Stop button.
2.
Turn off the machine.
3.
If a multi-page document is loaded, remove any pages other than the jammed page from
the ADF, then open the Document Feeder Cover.
4.
Pull out the jammed document from the ADF.
> Document Jams in the ADF