Canon 4204B019AA User Manual page 684

Document is too long.
#003
#005 No answer.
Try again.
#012
#017 No tone is detected.
#018 Line was busy.
#022 Try again.
Transmission has been
#059
canceled due to a fax
information mismatch.
Try again in black & white
#085
transmission.
The Stop button was
STOP
pressed during
transmission.
RX Report
This machine can print a RX (reception) report after receiving a document, confirming whether the
reception has been completed successfully. At the time of purchase, the machine is set so that RX
reports are not printed at all. You can set the machine to print a report each time it receives a
document, or only when an error occurs.
Note
For details on the RX report settings, see
For the errors when you receive a fax, see
Errors when you receive a fax
If an error occurs when you receive a fax, the error number is printed in the RX report (there are
some errors for which the cause is also printed).
operation. See Document Jams in the ADF
You attempted to send a document longer than
15.75 inches / 400 mm.
You cannot send a document longer than
15.75 inches / 400 mm from the ADF.
#003 is also printed if it takes time to send a
page. Divide the document or set the image
quality (Fax resolution) to a lower setting, then
resend it.
The recipient's fax machine does not respond.
Contact the recipient and have the recipient
check that the telephone line is connected
correctly.
There is no paper in the recipient's fax
machine.
Contact the recipient and have the recipient
load paper.
The machine could not detect the dial tone.
Dial tone detect in Transmission settings is set
to ON. Set it to OFF, then send the fax.
The fax/telephone number you dialed is busy.
Try dialing again after waiting for a moment.
The fax/telephone number registered to the
speed dial is incorrect.
Check the recipient's fax/telephone number,
correct the fax/telephone number registered to
the speed dial code, then send the document
again.
Transmission has been canceled because the
machine could not detect the recipient's fax
machine information or the information did not
match the dialed number. This error number is
displayed when Check RX fax info is set to ON.
For details, see Sending Faxes after Checking
Information (Checking the Recipient's
Information) .
The recipient's fax machine is not color-
compatible.
Resend the document in black & white.
The Stop button was pressed to cancel
transmission of the document. Resend it if
necessary.
RX Report .
Errors when you receive a fax
.
.