Table of Contents
Advertisement
4-1-3. Standby current check
This mode is used in case standby current is checked.
Checking method:
1. Enter the test mode.
2. Press the
/
key to select the "POWER", and press the
v
V
key to enter the minor item.
3. Press the
/
key to select the "DSVCHK".
v
V
4. Press the
key, enter the state of the deep sleep.
u
5. Press the [BACK] key, release the state of the deep sleep.
liquid crystal display
POWER DSVCHK
OK
6. Press the [BACK] key, return to minor item selection screen.
4-1-4. Charge current check
This mode is used in case charge current is checked.
Checking method:
1. Enter the test mode.
2. Press the
/
key to select the "POWER", and press the
v
V
key to enter the minor item.
3. Press the
/
key to select the "CHGCHK".
v
V
4. Press the
key, the charge setting is displayed.
u
liquid crystal display
POWER CHGCHK
AC
AC
5. In this state, each time the [OPTION] key is pressed, the port
setting for the charge is changed as shown in the table below.
Port control
Display CHG_XCHGEN CHG_PEN CHG_PEN2
AC
L
USB500
L
USB100
L
6. Press the [BACK] key, return to minor item selection screen.
H
H
H
H
H
L
NW-A805/A806/A808/NWZ-A815/A816/A818
4-1-5. Battery voltage check
This mode is used in case battery voltage is checked.
Checking method:
1. Enter the test mode.
2. Press the
/
key to select the "POWER", and press the
B
v
V
key to enter the minor item.
3. Press the
/
key to select the "BATTCHK".
v
V
4. Press the
key, the battery voltage is displayed.
u
When the battery voltage cannot be confirmed, "ERROR" is
displayed.
liquid crystal display
POWER BATTCHK
X.XXXV
X.XXXV: Battery voltage
6. Press the [BACK] key, return to minor item selection screen.
4-2. Audio
While playing the audio track, it's in a repeat state. If [BACK] key is
pressed, it's stopped.
B
Press the [VOL +] key to switch the HP/LINE.
liquid crystal display
MPTAPP MENU
POWER
AUDIO
VIDEO
OTHER
SHUTDOWN
EXITTEST
OUTPUT
SN
F1
F2
SEPLR
SEPRL
MAXOUT
NMLZR
SPCHK
B
13
Hide quick links:
Advertisement
Table of Contents
