Regza-L1Nk; Displaying Tv Status Information; Understanding The Auto Power Off Feature; Undcrstanding The Last Mode Memory Feature - Toshiba 46RV525RZ Owner's Manual

Integrated high definition lcd television
Hide thumbs Also See for 46RV525RZ:
Table of Contents

Advertisement

/ALB You"g
$
xxx...
9:00pm, 11 :llOpm E$T
:todaV'!!ltijt:1rt;..-anMfI.
_ .
'..
t··t1iW.,.
.
.
.
. ; .
.
Note: The location of the banner can be moved
to the top or bottom of the screen by pressing ...
or T while the RECALL or INFO display is on-
screen.
The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast for the
day. This feature functions in
ANT/CABLE
mode only.
To close the RECALL screen:
RECALL
.
Press
0
agalIl.
Understanding the auto power off
feature
To display TV status information using INFO:
INFO
Press 0 on the remote control.
The following additional information will display for
off air digital channels (if appl icable):
• Title
• Duration
• Detailed description
Displaying TV status information
Note: When you tum on the Audio Receiver,
change its input source, or adjust the sound
volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has
been selected. Tum the TV off and on again to
output the sound from the TV speakers.
To set the REGZA-LINK® Setup:
1
From the
Setup
menu, highlight
REGZA-L1NK
Setup
and press
8.
2
Press'" or T to highlight
Enable REGZA-L1NK.
3
Press'" or
~
to select
On.
Note: If you select Enable REGIA-LINK Off, the
other items will be grayed out.
4
Press'" or T to highlight the
REGZA-L1NK Setup
item you want to use, and press'" or
~
to select
On
or desired mode.
• TV Auto Input Switch: On/On'
• TV Auto Power: On/Off
• Device Auto Standby: On/Ott'
• Speaker Preference: TV SpeakerslAudio Receiver
5
To save the new settings, highlight
Done
and press
8.
To revert to the factory defaults, highlight
Reset
and press
8.
To display TV status information using
RECALL:
RECALL
Press
0
on the remote control.
The following information will display (if applicable):
• Current input
(ANT/CABLE, VIDEO 1,
etc.)
• If ANT/CABLE is the current input, either "CABLE"
(for cable TV) or "ANT' (for over-the-air broadcasts).
• Channel number (if in
ANT/CABLE
mode)
• Channel label (if set)
• Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)
• Stereo, Mono or SAP audio status (when HDMI input
mode, Dolby Digital or PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status
• Game Timer (if set)
1_1-,!iilli1i_.""' . NMlII
II'
I
Understanding the last mode
memory feature
If
the power is cut off while you are viewing the
TV, the Last Mode Memory feature automatically
turns on the TV when the power is resupplied.
Note: If it's possible, and you will be away
from the TV for an extended period of time you
should unplug the power cord.
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents