Selecting Stereo/Sap Broadcasts; Adjusting The Audio Quality; Selecting The Optical Audio Output Fonnat - Toshiba 46RV525RZ Owner's Manual

2
Highlight
Digital Audio Selector
and press @.
Audio Settings
Advanced Audio Settings
Audio Setup
3
Press" or
~
to select
Audio.
and then press
~
or
~
to select the desired service.
4
EXIT
Press
o.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS
also can transmit a second audio program (SAP)
containing a second language. music. or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast. the
word "STEREO" or "SAP" appears on-screen when
REOLL
is pressed.The MTS feature is only available
for analog signals on the
ANT/CABLE
input.
To listen to stereo sound:
1
MENU .
Press 0 and open the
Audio
menu.
2
Highlight
Audio Setup
and press @.
3
In the
MTS
field. select
Stereo.
4
To save the new settings. highlight
Done
and
press@.
To reset the settings to the factory defaults.
highlight
Reset
and press @.
Note:
• You can typically leave the TV in Stereo
mode because it will automatically output
the type of sound being broadcast (stereo
or monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the
Language
field in step 3 above. and
then press
~
or
~
to select the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select
SAP
in step 3 above.
Note:
• A second audio program (SAP) can be heard
only on those TV stations that offer it. For
example,
a
station might broadcast another
44
language as a second audio program. If you
have SAP on, you will see the current program
on the screen but hear the other language
instead of the program
s
normal audio.
• If you have SAP on and the station you are
watching is not broadcasting
a
second audio
program, the station
s
normal audio will be
output. However, occasionally there is no
sound at all in SAP mode. If this happens, set
the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the
bass. treble. and balance.
To adjust the audio quality:
1
MENU .
Press 0 and open the
Audio
menu.
2
Highlight
Audio Settings
and press @.
3
Press ~ or .. to highlight the item you want to
adjust
(Bass. Treble.
or
Balance).
4
Press
~
or
~
to adjust the level.
•
~
makes the bass or treble weaker or
increases the balance in the left channel
(depending on the item selected).
•
~
makes the bass or treble stronger or
increases the balance in the right channel
(depending on the item selected)
5
To save the new settings. highlight
Done
and press
@. To reset the settings to the factory defaults.
highlight
Reset
and press @.
Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the
Optical
Audio Out
terminal on the TV (see "Connecting a
digital audio system" on page 18).
To select the optical audio output format:
1
MENU .
Press 0 and open the
Audio
menu.
2
Highlight
Audio Setup
and press @.
3
In the
Optical Output Format
field. select either
Dolby Digital
or
PCM.
depending on your device.
4
To save the new settings. highlight
Done
and press
@. To revert to the factory defaults. highlight
Reset
and press
8.