Copying A Disc - HP A1710n - Pavilion - 1 GB RAM Getting Started Manual

7 Watch a preview of your video in the Preview area.
8 When ready to create the video disc, click Burn.
For more help using Roxio Creator and Roxio MyDVD, refer to the Help menu in the
Roxio program.

Copying a disc

The following explains how to make a copy of an existing CD or DVD.
Copying a disc using two disc drives
If you have two disc drives, you can copy a CD or DVD directly from one drive to the
other. To copy a DVD using this method, you must have two DVD drives. Otherwise, use
the steps in the next section to copy the DVD. To copy a CD or DVD using two disc drives:
1 Insert a writable CD or DVD into a disc-burning drive.
2 Insert the disc you wish to copy into the other disc drive.
3 Open the Roxio Creator program by clicking the Windows Start Button, All
Programs, Roxio, and then click Creator.
4 Click the Copy tab.
5 Click Copy Disc.
6 Ensure the correct disc drives are selected.
7 Click the Copy button.
When the process is complete, you are prompted to create a disc label. For
more information on creating a disc label, refer to "Making a disc label using
LightScribe," or "Making a paper disc label."
For more help using Roxio Creator, refer to the Help menu in the program.
Copying a disc using one disc drive
If you have only one disc drive, Roxio Creator stores an image file of the disc temporarily
on the computer hard disk drive. Use these steps to copy a CD or DVD using one disc
drive:
1 Insert the disc you wish to copy into the disc-burning drive.
2 Open the Roxio Creator program by clicking the Windows Start Button, All
Programs, Roxio, and then click Creator.
3 Click the Copy tab.
4 Click Copy Disc.
5 Click the Copy button.
Roxio Creator creates an image file of the disc. This file is temporarily stored on the
computer hard disk drive.
Creating Audio and Data Discs
151