Yamaha Arius YDP-V240 Owner's Manual page 113

LCD Message
OverCurrent
Overwrite ?
Please Wait...
Rename File
Save OK ?
Saved data is not found.
Saving...
Send OK?
Sending...
"Since the media is in use now, this
function is not available."
Style data is too large to load.
Sure ? [YES/NO]
"The limit of the media has been reached."
The media is not formatted.
"The media is write-protected."
"The song data is too large to be
converted to notation."
There are too many files.
"This function is not available now."
[nnn] "file name"
NOTE
• Not all the messages are listed in the table: the messages neces-
sary to be explained only.
Communication with the USB device has been shut down because of the
overcurrent to the USB device. Disconnect the device from the USB TO
DEVICE terminal, then turn on the power of the instrument.
Confirms whether overwriting is executed or not.
Displayed when executing the jobs that take some time, such as displaying
scores and lyrics, or stopping recording.
Displayed while rewriting the file name in the Musicsoft Downloader.
Confirms whether saving is executed or not.
Displayed when the data to be saved doesn't exist.
Displayed while saving data in the memory. Never turn the power off while
saving. Doing so may result in data loss.
Confirms whether the data transmission is executed or not.
Displayed while transmitting data.
Indicates that the file control function is currently unavailable since the
media is being accessed.
Indicates that style data cannot be loaded since the style data is too large.
Reconfirms whether each operation is executed or not.
Indicates that saving data cannot be executed since the folder/directory
structure has become too complicated.
Indicates the inserted media has not been formatted.
Indicates that the inserted media cannot be written since it is write-pro-
tected. Set to the write-protect switch to the "overwrite" position before use.
Indicates that the score cannot be displayed since the song data is too
large.
Indicates that saving data cannot be executed since the total number of files
exceeds the capacity.
Indicates the designated function is not available since the instrument is
executing another job.
Indicates the file name of the currently transmitting. "nnn" indicates the
receiving block.
Comment
Owner's Manual
Messages
113