Download Print this page

Yamaha YDP-V240 Installation Manual page 4

Accessory cd-rom for windows
Hide thumbs Also See for YDP-V240:

Advertisement

NOTE
• This screen will not appear on Windows 7 . When the
message "Device driver software was not successfully
installed. " appears, continue the installation procedure.
NOTE
• This screen will not appear if you are updating the USB-
MIDI driver from the previous version. Continue the
installation procedure.
8
Open the following folder from the CD-
ROM drive in your "My Computer"
folder, and double click "setup.exe."
• For users of 32 bit version Windows 2000/XP/
Vista/7: "USBdrv32_"
• For users of 64 bit version Windows XP/Vista/7:
"USBdrv64_"
* Select [Start] menu  [Control Panel]  [System] to
check the system. (Windows XP: "x64 Edition"
appears on the 64 bit version, and does not appear on
the 32 bit version.)
9
When the "File Download" window
appears, click [Run] or [Open].
The "Preparing to install" window appears. The
next window will appear after finishing this prep-
aration.
NOTE
• The messages that appear in this window may differ
somewhat depending on your browser.
NOTE
• (Windows XP) If the "Security Warning" window
appears, click [Run].
NOTE
• (Windows Vista/7) If the "User Account Control" window
appears, click [Continue] or [Yes].
10
When the "Welcome to the InstallShield
Wizard for Yamaha USB-MIDI Driver"
window appears, click [Next].
If the warning message below appears during the
installation, click [Yes], [Continue Anyway], or
[Install].
Windows 2000
4
Accessory CD-ROM for Windows Installation Guide
Windows XP
Windows Vista/7
11
When a message appears indicating
that the driver has been successfully
installed, click [Finish].
NOTE
• On some computers, it may take a few minutes before
this screen appears.
12
When a window appears prompting you
to restart the computer, do so.
Restart the computer by following the on-screen
directions.
NOTE
• This display will not appear when using Windows XP
x64/Vista/7 . No restart is necessary.
Checking the version of the driver
Open the "Control Panel" and double-click the
"Yamaha USB-MIDI Driver" icon.
A window appears and the driver version is indicated
in the lower left of the window.
NOTE
• When using Windows XP x64/Vista/7 , double-click the
"Yamaha USB-MIDI Driver (WDM)" icon.

Advertisement

loading

Subscribe to Our Youtube Channel