Advertisement
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk =
Note number (Transmit: 09H–78H = A-2–C8 /
Receive: 00H–7FH = C-2–G8)
vv =
Velocity (Key ON = 01H–7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk =
Note number: 00H–7FH = C-2–G8
vv =
Velocity
2. CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc =
Control number
vv =
Data Range
(1) Bank Select
ccH
Parameter
00H
Bank Select MSB
20H
Bank Select LSB
Bank selection processing does not occur until receipt of next
Program Change message.
(2) Modulation (reception only)
ccH
Parameter
01H
Modulation
(3) Main Volume
ccH
Parameter
07H
Volume MSB
(4) Panpot (reception only)
ccH
Parameter
0AH
Panpot
(5) Expression
ccH
Parameter
0BH
Expression MSB
(6) Damper Pedal/Sustain
ccH
Parameter
40H
Sustain MSB
(7) Sostenuto (reception only)
ccH
Parameter
42H
Sostenuto
(8) Soft Pedal (reception only)
ccH
Parameter
43H
Soft Pedal
(9) Portamento Control (reception only)
ccH
Parameter
54H
Portamento
(10) Effect1 Depth (Reverb Send Level)
ccH
Parameter
5BH
Effect1 Depth
Adjusts the reverb send level.
(11) Effect4 Depth (Variation Effect Send Level)
ccH
Parameter
5EH
Effect4 Depth
(12) RPN
65H
RPN
64H
RPN
06H
Data Entry
26H
Data Entry
60H
Data
61H
Data
* Parameters that are controllable with RPN:
• Coarse Tune
• Fine Tune
• Pitch Bend Range
2
P-35 MIDI Reference / MIDI-Referenz / Référence MIDI / Referencia MIDI
Data Range (vvH)
00H:Normal
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...3FH:off, 40H...7FH:on
Data Range (vvH)
00H...3FH:off, 40H...7FH:on
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
MSB
LSB
MSB
LSB
Increment
Decrement
3. MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc =
Control number
vv =
Data Range
(1) All Sound Off
ccH
Parameter
78H
All Sound Off
(2) Reset All Controllers
ccH
Parameter
79H
Reset All Controllers
Resets controllers as follows.
Controller
Pitch bend
Modulation
Expression
Sustain
Portamento Control
RPN
(3) Local Control (reception only)
ccH
Parameter
7AH
Local Control
(4) All Notes Off
ccH
Parameter
7BH
All Notes Off
Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the sustain or sostenuto pedal
will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH
Parameter
7CH
Omni Off
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH
Parameter
7DH
Omni On
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH
Parameter
Data Range (vvH)
7EH
Mono
00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH
Parameter
7FH
Poly
Same processing as for All Sound Off.
• When Control Change is turned OFF, Control Change messages
will not be transmitted or received.
• Local on/off, OMNI on/off are not transmitted. (The appropriate note
off number is supplied with "All Note Off" transmission).
• When a voice bank MSB/LSB is received, the number is stored in
the internal buffer regardless of the received order, then the stored
value is used to select the appropriate voice when a program
change message is received.
• Poly mode is always active. This mode will not change when the
instrument receives a MONO/POLY mode message.
Data Range (vvH)
00H
Data Range (vvH)
00H
Value
±0
0 (OFF)
127 (Max)
0 (OFF)
Cancels the Portamento Source
Key Number that was received.
Number not specified; internal data
will not change.
Data Range (vvH)
00H (off), 7FH (on)
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H
Advertisement
