Yamaha CP1 Owner's Manual page 34

Creating Original Performances
8
Turn Knobs 2 to 6 to set parameters as required.
For details on the parameters that can be set within this parameter setting screen, see Reverb from the Reference
section (page 50).
9
Press the [COMMON] button.
The Common Settings screen will be displayed.
10
Use the [ PAGE] and [PAGE
11
Turn Knobs 1 to 6 to set parameters as required.
For details on the parameters set within the Common Settings area, see Common Settings from the Reference
section (page 51).
12
Repeat the above process from Step 10 for any other pages from the Master Equalizer screen containing
parameters that you wish to modify. When all of the required settings have been made, proceed to the next step.
13
Press the [STORE] button to store your Performance.
All parameters from the Piano blocks (i.e., the Piano Type and Pre-Amplifier units), the Modulation Effect blocks, the
Power-Amplifier / Compressor blocks, the Reverb block, and the Common Settings area are stored as a
Performance. For more details regarding the storing of Performances, see page 40.
NOTE
If you wish to save your Performance in an External Performance memory, be sure to plug the USB flash-memory device containing that
Performance memory into the [USB TO DEVICE] port before pressing the [STORE] button.
14
Press and hold the [MASTER EQUALIZER] button (for at least one second).
The Master Equalizer screen will be displayed.
NOTE
You can jump to the Master Equalizer screen by holding the [EXIT/jump to edit] button and pressing the [MASTER EQUALIZER] button.
15
Use the [ PAGE] and [PAGE
16
Turn Knobs 1 to 6 to set parameters as required.
For details on the parameters that can be set within the Master Equalizer block, see Master Equalizer from the
Reference section (page 55).
17
Repeat the above process from Step 15 for any other pages from the Master Equalizer screen containing
parameters that you wish to modify. When all of the required settings have been made, proceed to the next step.
18
Press the [STORE] button to store the modified Master Equalizer settings.
Master Equalizer settings are stored within the CP1's system settings. For more details regarding the storing
procedure, see page 40.
34
CP1 Owner's Manual
] buttons to navigate to the page containing the parameter(s) you wish to set.
] buttons to navigate to the page containing the parameter(s) you wish to set.
Page number