Scan To File - Brother DCP 165C - Color Inkjet - All-in-One User Manual

Scan to File

You can scan a black and white or a color document into your Macintosh
you choose. The file type and specific folder are based on the settings you have chosen in the Scan to File
screen of the Brother ControlCenter2. (See File on page 203.)
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to File.
Press OK.
d
Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
a
Load your document.
b
Press the (Scan) key.
c
Press Scan to File.
d
Press Black Start or Color Start.
The machine starts the scanning process.
Note
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See SCAN
on page 198.)
• If you would like to change the file name of scanned documents, enter the file name in File Name section
on the Device Button tab of the ControlCenter2 configuration.
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.
®
and save it as a file in the folder
Scanning
10
10
10
185