Tv Camport Auto Sense Operation - LG 37LD330H Commercial Mode Setup Manual

The Camport Auto Sense function is enabled when:
1. Installer Menu item 034 CAMPORT EN is set to 1 AND
2. Installer Menu item 040 AUTO CAMPORT is enabled (1).
Selectable: Can be accessed with INPUT key, direct
access, etc.
Auto Sense: TV switches to this input when connector is
inserted. The Camport (Side [AV IN 2] Video) has the
highest priority and will override any commands including
tuning to the Start Channel.
Camport Operation (Stand-alone)
When Camport Auto Sense is enabled as above, the TV's
source will switch to the Side (AV IN 2) Video Aux source
whenever a plug is inserted into the AV IN 2 Video input.
When the plug is removed, the TV will switch back to the
previous channel or input source that was being displayed
before the plug was inserted. However, if any direct access
to an RF channel or Aux channel is requested while the
Camport is active, then, when the video plug is removed,
the TV will switch to the last requested channel. Source
changes using any Source keys (INPUT) are ignored.
Channel Up/Down and Flashback commands are not direct
access tuning commands, and they are also ignored.
Camport Operation (FTG or PPV)
The operation will be similar to that of the Stand-alone
Mode. However, when the Channel Map is maintained
external to the PTC (i.e., FTG and PPV), Channel Up/
Down or Flashback keys are sent as Direct Access tuning
commands to the PTC/TV.
206-4185
Reference: TV Camport Auto Sense Operation
CAMPORT (Side Video) Functionality Control
CAMPORT EN
Previous State
Before Inserting
Previous State
Before Inserting
Item 034 Item 040
AUTO CAMPORT
0
0
1
1
Operation While
CAMPORT is
CAMPORT Active
Aux or RF
None
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
Input Keys
Operation While
CAMPORT is
CAMPORT Active
Aux or RF
None
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
Input Keys
Side (AV IN 2)
Video Operation
0 Disabled
1 Disabled
0 Selectable
1 Auto Sense
State Upon
Removal of
CAMPORT
Previous Aux
or RF Channel
Last Requested
Aux or RF Channel
Previous Aux
or RF Channel
State Upon
Removal of
CAMPORT
Previous Aux
or RF Channel
Last Requested
Aux or RF Channel
Last Requested Aux
or RF Channel
41