Customizing The Screen Display; Setting The Cartography Detail - Raytheon RayChart 620 Operation Manual

Chapter 6: Customizing the RayChart 620
3. Press CLEAR to return to the chart display.

6.3 Customizing the Screen Display

You can customize the display of your RayChart 620 so that all the
information you require is available at the touch of a button, and in the
layout and detail you prefer.
You customize the display using the SCREEN menu, which is
displayed when you press the MENU key. The SCREEN menu options
control the following:
CARTOGRAPHY
ORIENTATION
WINDOWS

Setting the Cartography Detail

The CARTOGRAPHY option allows you to select the types of
cartographic features that will be displayed or hidden. You can also
enable or disable Plotter Mode.
Note: Some cartographic details are automatically suppressed on
small-scale charts, to avoid the chart appearing too cluttered.
To set your preferred levels of cartographic detail:
1. Press MENU to display the main menus.
2. Use the trackpad or the SCREEN soft key to highlight the
3. Use the trackpad to move up or down the list and highlight the menu
Alternatively, to remove all the data from the card, press FORMAT
C-CARD. Then press ENTER to confirm the deletion, or CLEAR to
abandon the operation.
Setting the cartographic detail
Setting the chart orientation
Setting up the contents of the windows that can
be displayed using the DISPLAY menus
CARTOGRAPHY option from the SCREEN menu, and press
ENTER.
The Map Configuration main menu is displayed.
you require, then press ENTER to accept your selection.
The menu options and their current settings are then displayed, as
shown in the following table.
71