Download  Print this page

Options - Electrolux ESF2210DW User Manual

Compact dishwasher, for a maximum of 6 place settings.
Hide thumbs

Advertisement

www.electrolux.com
6
Programme
3)
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
2) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.

5. OPTIONS

Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the pro-
gramme indicator
flash and the programme indicator
1)
Degree of
soil
Type of load
Light soil
Crockery and
cutlery
starts to
comes on with fixed light.
Programme
Duration
phases
(min)
Wash 50 °C
36
Rinse
4. Press immediately Program.
• The programme indicator
comes on with fixed light.
The programme indicator
starts to flash.
5. Wait until the programme indicator
cator
6. Press Program. The end indicator
comes on. The acoustic signal for the
end of programme is activated.
7. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to "How to activate the acoustic
signal for the end of programme" and
follow the procedure from step (1) to
step (5). The end indicator is on.
2. Press Program. The end indicator
goes off. The acoustic signal for the
end of programme is deactivated.
3. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
Energy
(kWh)
0.40
goes off. The programme indi-
continues to flash.
Water
(l)
6

Advertisement

loading

  Also See for Electrolux ESF2210DW