Download  Print this page

Troubleshooting - Electrolux ESF2210DW User Manual

Compact dishwasher, for a maximum of 6 place settings.
Hide thumbs

Advertisement

12 www.electrolux.com
9.1 Cleaning the filters
9.2 Cleaning the spray arm
9.3 External cleaning
Clean the appliance with a moist soft
cloth.

10. TROUBLESHOOTING

The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
Alarm code
• The indicator of the set programme
flashes continuously.
• The end indicator flashes 1 time in-
termittently.
A
B
1.
Turn the filter (A) counterclock-
wise and remove it.
2.
Remove the filter (B).
3.
Wash the filters with water.
4.
Put the filter (B) to its initial po-
sition.
5.
Put the filter (A) into position in
filter (B). Turn it clockwise until
it locks.
An incorrect position of the
filters can cause bad
washing results and dam-
age to the appliance.
1.
Turn the nut counterclockwise.
2.
Remove the spray arm.
3.
Clean the holes.
If the holes in the spray arm are clogged,
remove remaining parts of soil with a thin
pointed object.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
With some problems, different indica-
tors flash continuously or intermit-
tently at the same time to show an
alarm code.
Problem
The appliance does not fill with water.

Advertisement

loading

  Also See for Electrolux ESF2210DW