Sony PCV-RX560 - Vaio Desktop Computer Online Help Manual page 76

1.
Click Start in the Windows taskbar, and select Turn Off Computer. Select Restart.
2.
When the Sony screen displays, press the F2 key on your keyboard.
3.
Select the Advanced tab from the Setup Utility screen.
4.
Select "I/O Device Configuration" and press Enter.
5.
Use the arrow keys to highlight Parallel Port Mode and press Enter.
Note:
You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options using the directional arrow
keys.
6.
Select the desired setting displays, and press Enter.
7.
Press the F10 key to Save and Exit.
Topic: My optical driv e tray does not open.
Use the Eject button
1.
Make sure the computer is turned on.
2. Press the Eject button on the drive.
Use the My Computer icon
1.
Click Start in the Windows taskbar, then select My Computer.
2. Right-click the appropriate optical drive icon.
3. Select Eject from the shortcut menu.
Note:
Avoid using adhesive labels to identify your CD media. Adhesive labels may come off while the CD media is in use
in your optical drive(s) and may cause damage to the unit.
Topic: I cannot play a DVD or CD.
After inserting your optical disc, wait a few seconds for it to be detected before trying to access it.

 Verify that the disc is in the tray with the label side facing up.
 Install your CD or DVD software according to the manufacturer's instructions.
 If your drive reads some DVDs or CDs, but not others, check the shiny side of the disc for dirt or scratches. You may
also need to clean the disc drive lens with an appropriate cleaner.
Note:
To recover the CD or DVD software applications that are preinstalled on your computer, see
CD(s) for more information.
Topic: I cannot play a DVD.
If a region code warning appears when you are using the DVD player application, it may be that the region code of the DVD
you are trying to play is incompatible with the region code setting of your optical drive. A region code is listed on the disc
packaging. Region code indicators such as "1" or "ALL" are labeled on some DVDs to indicate the type of player that can
play the disc. Unless a "1" or "ALL" appears on the DVD or on its packaging, you cannot play the disc on this system.
If you hear audio but cannot see video, your computer's video resolution may be set too high. To improve video resolution,
verify that your screen area is set to 1024 x 768, using 32-bit color (preset factory default). To check your video resolution,
see the Troubleshooting topic,
Note:
If your computer's video memory is 11 MB shared system memory, you may improve video resolution by changing your
screen area to 800 x 600, using 16-bit color. See your Specifications sheet for details about your computer's video RAM.
If you see video but cannot hear audio, check all of the following:
Verify that your DVD player's mute feature is turned off.

Check the master volume setting in the Audio Mixer.

 Check the volume settings on your computer speakers.
How do I change the video resolution of my display?
To Use the Application Recovery
Page 76