Getting Started - Honeywell W7006A User Manual

Product Release Version 3.x.x.
At installation, the Home Controller Gateway is connected to your PC and powered on.
Software for the Home & Away System is installed in the Home Controller Gateway
using a compact flashcard memory. Thermostats, the Wall Panel System User Interface,
Web cameras and security panels are connected to the Gateway. Light and appliance
modules are connected to their respective devices, plugged in and programmed into the
system.
The installer also will configure, or help you to configure, default settings for some
devices, Lifestyles, Schedules and passwords required to use the interfaces. You can
change the default settings at anytime using the MyHome Portal Web interface; see the
Configuring Home Controller Default Settings section.
You will be able to use light, appliance, thermostat, and security features immediately.
However, you must define Lifestyles and Schedules, as described in this guide, before
you can take advantage of these features.
Familiarize yourself with each of the components installed as part of your Home & Away
System. Begin by reviewing the documentation provided for each component:
Component User Guide name (ID)
Web, telephone, Home & Away W7006A Home Controller Gateway User
and SUI Guide (69-1321)
Thermostat T8635L Honeywell Microelectronic Communicating
Programmable Thermostat Owner's Guide (69-1332)
Security Ademco Security System User's Manual (N7229V2 Rev. B
1/97)
Web camera GWC308S Web Camera Installation Instructions (69-1560)
For related information (primarily for installers) refer to the installation instructions for the
W7006A Home Controller Gateway, T8635L Thermostat, and S7340A System User
Interface (SUI).
Set-up your browser and computer for optimal Home & Away Web performance.
Set screen resolution to 800 x 600 (or higher) using your computer monitor or display
control panel.
3
Home Controller Gateway User Guide

GETTING STARTED

69-1321-2