Setting Lights And Appliances From The Web - Honeywell W7006A User Manual

Home Controller Gateway User Guide
To display status information
for lights and appliances:
To check or change the brightness
To check or change the state
of an appliance:
69-1321-1
You can change the brightness of individual lights and turn appliances off and on from
the MyHome Portal.
Click the Device Control navigation button on the Home page, then click the Lights or
Appliances option on the Device Control page.
of a light: Click the Device Control navigation button on the Home page, then click the Lights
option on the Device Control page. Click the desired brightness level button (Off, On, or
a percentage) under the name of the light. When the setting takes effect, the button is
displayed in blue with white letters.
Click the Device Control navigation button on the Home page, then click the
Appliances option on the Device Control page. Click the On or Off button under the
appliance name. When the setting takes effect, the button is displayed in blue with white
letters.
NOTE: The Home & Away System communicates differently with different types of
X10 devices. Changes made directly to some lights or appliances are not
communicated to the MyHome Portal. For example, if you manually turn off a
light that was turned on by a Schedule, the Portal continues to show the light
as on. The table below indicates which X10 devices tell the Home & Away
System when their state is manually changed.
X10 Device
1-way light modules
1-way light switches
1-way appliance modules
2-way light modules
2-way light switches
2-way appliance modules
OnQ Advanced Lighting Control
(ALC) Lighting

Setting Lights and Appliances from the Web

12
Product Release Version 3.x.x
Communicates changes made
at the device itself?
No
No
No
No
Yes
No
Yes