Loading Paper In The Side Feeder - Kyocera KM-6030 Operation Manual

English

Loading Paper in the Side Feeder

The side feeder has a capacity of 4000 sheets standard paper(80g/m
paper sizes can be used in side feeder.
Inch models: 11 × 17", 8
Metric models: A3, A4, A4R
NOTE:
feeder on the operation panel. The available options are plain, recycled, colored paper
and thick paper.
For details, refer to the Operataion Guide for the machine.
Consult your Dealer or Service Representative for changing the paper sizes.
1
Open the top cover.
2
Align the paper flush against the left side in the
back of the feeder as you load it.
NOTE:
that it is not curled or folded. Paper that is
curled or folded may cause paper jams.
Load the paper with the side to be copied
face-up.
NOTE:
the paper touches the detect switch. The paper
lifter descends for approximately 500 sheets after
three seconds.
Paper can be added after the paper lifter is
stopped.
Do not touch the paper lifter when it is running.
10
× 14", 8
1/2
After loading paper, be sure to specify the type of the paper loaded in the side
Before loading the paper, be sure
The side feeder detects the paper when
× 11", 11 × 8 "
1/2 1/2
). The following
2
PF-660 OPERATION GUIDE