Related Manuals for Samsung SyncMaster S24A650S
Summary of Contents for Samsung SyncMaster S24A650S
-
Page 1: User Manual
User Manual SyncMaster S22A650S S24A650S The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00081D-03... -
Page 2: Before Using The Product
© 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. -
Page 3: Symbols For Safety Precautions
Before Using the Product Icons used in this manual The following images are for reference only. Real-life situations may differ from what is shown in the images. Symbols for safety precautions A serious or fatal injury may result if instructions are not followed. Warning Personal injury or damage to properties may result if instructions are Caution... -
Page 4: Cleaning
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. -
Page 5: Securing The Installation Space
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Be sure to contact Samsung Customer Service Center (page 84) if the inside of the monitor needs cleaning. (service fee will be charged). -
Page 6: Safety Precautions
Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. -
Page 7: Installation
The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. - Page 8 Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire.
-
Page 9: Operation
Be sure to consult Samsung Customer Service Center (page 84) before installation if you want to install the product at such a place. - Page 10 Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. Do not move the product by pulling the power cord or any cable.
- Page 11 (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 84).
- Page 12 Before Using the Product Do not let water enter the DC power device or get the device wet. An electric shock or fire may result. Avoid using the product outdoors where it can be exposed to rain or snow. Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC power adapter near to any heating apparatus.
-
Page 13: Correct Posture To Use The Product
Before Using the Product Exercise caution when adjusting the product angle or stand height. Otherwise, children's fingers or hands may become stuck and injured. Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. Product failure or personal injure may result. -
Page 14: Table Of Contents
Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Symbols for safety precautions Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Electricity and Safety Installation Operation Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging Checking the Components... - Page 15 Connecting the Product to a PC as a USB HUB Connecting a PC to the Product Utilizing the Product as a USB HUB Connecting the Power SCREEN SETUP MAGIC SAMSUNG MAGIC Bright SAMSUNG MAGIC Color Brightness Configuring Brightness Contrast Configuring Contrast Sharpness...
- Page 16 Table Of Contents Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma RESIZING OR Image Size RELOCATING THE Changing the Image Size SCREEN H-Position & V-Position Configuring H-Position & V-Position Menu H-Position & Menu V-Position Configuring Menu H-Position & Menu V- Position SETUP AND RESET Eco Motion Sensor...
- Page 17 Initializing Settings (Reset) INFORMATION MENU AND INFORMATION OTHERS Displaying INFORMATION Configuring Brightness in the Startup Screen TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS General PowerSaver...
- Page 18 Table Of Contents Terminology INDEX Table Of Contents...
-
Page 19: Preparations
Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the Styrofoam from the product. Check the components and remove the Styrofoam and plastic bag. The appearance of actual components may differ from the image shown. -
Page 20: Checking The Components
Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual Power cable DC power adapter... -
Page 21: Parts
Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description Open or close the onscreen display (OSD) menu, or return to the last MENU menu. - Page 22 Preparations Icons Description Configure Customized Key and press [ ]. The following options will be enabled. MAGIC Image Size To configure Customized Key, go to SETUP&RESET Customized Key and select the mode you want. Move to the upper or lower menu or adjust the value for an option on the OSD menu.
-
Page 23: Reverse Side
Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to the DC power adapter. Connects to a PC using a DP cable Connects to a PC via a DVI cable. -
Page 24: Installation
Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or Insert the stand base into the Do not remove the fixing pin until cushion on a flat surface. Next, stand in the direction of the you are finished attaching the place the product with the face arrow. -
Page 25: Adjusting The Product Tilt And Height
Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. To adjust the height, remove the fixing pin. The monitor tilt and height can be adjusted. Hold the top center of the product and adjust the height carefully. -
Page 26: Installing A Wall-Mount Kit Or Desktop Stand
Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or Unfasten the screw from the Lift and detach the stand. cushion on a flat surface. Next, back of the product. -
Page 27: Anti-Theft Lock
Samsung shall not be held liable for any product damage or personal injury caused by using a wall- mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. -
Page 28: Magicrotation Auto
Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation. -
Page 29: Connecting And Usinga Source Device
Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. -
Page 30: Connecting And Using A Pc
Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (analogue type) RGB IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT port on the PC. - Page 31 Connecting and Using a Source Device Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC. (For details, refer to "2.5 Connecting the Power".) Press [ ] to change the input source to Digital. Audio is not available if the PC and product are connected via the [DVI] port.
-
Page 32: Driver Installation
An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive. -
Page 33: Setting Optimum Resolution
Connecting and Using a Source Device 2.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz Follow the above settings to set the resolution. -
Page 34: Changing The Resolution Using A Pc
Connecting and Using a Source Device 2.2.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display... - Page 35 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. 2 Connecting and Using a Source Device...
- Page 36 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
-
Page 37: Connecting Headphones
Connecting and Using a Source Device Connecting Headphones AUDIO IN Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT port on the PC. If the stereo cable is connected, the Volume (VOL) can be adjusted using the [ ] buttons on the... -
Page 38: Connecting The Product To A Pc As A Usb Hub
Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2.4.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. -
Page 39: Connecting The Power
Connecting and Using a Source Device Connecting the Power Put the DC power adapter in the groove, with the switch facing upward. - Push the adapter until you hear a “click.” Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. -
Page 40: Screen Setup
Configure the screen settings such as brightness and color tone. MAGIC This feature provides the viewing angle, brightness, and tint to suit your preferences. 3.1.1 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. -
Page 41: Samsung Magic Color
Screen Setup 3.1.2 SAMSUNG MAGIC Color Color is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. This menu is not available when Bright is in Cinema Dynamic Contrast mode. Configuring... -
Page 42: Brightness
Screen Setup Brightness Adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. This menu is not available when Bright is set to Dynamic Contrast mode. This menu is not available when Eco Light Sensor Eco Saving is set to On. -
Page 43: Contrast
Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. This menu is not available when Bright is in Cinema Dynamic Contrast mode. This menu is not available when Color is in Full... -
Page 44: Sharpness
Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. This menu is not available when Bright is in Cinema Dynamic Contrast mode. This menu is not available when Color is in Full... -
Page 45: Coarse
Screen Setup Coarse Vertical noise (stripes) on the screen will be removed. The screen may be moved after changing the frequency (Coarse). If this is the case, move the screen to the center using the H-Position adjustment menu. Only available in Analog mode. -
Page 46: Fine
Screen Setup Fine Horizontal noise (stripes) on the screen will be removed. If the noise is not completely removed after adjusting the Fine value, adjust Coarse and try Fine adjustment again. Only available in Analog mode. 3.6.1 Adjusting Coarse Press [ ] on the product. -
Page 47: Response Time
Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time Normal Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product. -
Page 48: Configuring Tint
Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in... -
Page 49: Green
Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in Full Intelligent mode. 4.2.1 Configuring Green Press [ ] on the product. -
Page 50: Blue
Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in Full Intelligent mode. 4.3.1 Configuring Blue Press [ ] on the product. -
Page 51: Color Tone
Configuring Tint Color Tone Adjust the general color tone of the picture. This menu is not available when Color is in Full Intelligent mode. 4.4.1 Configuring the Color Tone Settings Press [ ] on the product. MENU Press [ ] to move to COLOR and press [ ] on the product. -
Page 52: Gamma
Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma Press [ ] on the product. MENU Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. -
Page 53: Resizing Or Relocating The Screen
Resizing or Relocating the Screen Image Size Change the picture size. 5.1.1 Changing the Image Size Press [ ] on the product. MENU Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product. -
Page 54: H-Position & V-Position
Resizing or Relocating the Screen H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. Available only when Image Size is set to Screen Fit. Only available in Analog mode. 5.2.1 Configuring H-Position & V-Position Press [ ] on the product. -
Page 55: Menu H-Position & Menu V-Position
Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.3.1 Configuring Menu H-Position & Menu V-Position Press [ ] on the product. MENU Press [ ] to move to... -
Page 56: Setup And Reset
Setup and Reset Eco Motion Sensor, Eco Light Sensor, and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings. 6.1.1 Eco Motion Sensor Eco Motion Sensor activates to save power when it does not detect any movement within a specified area for a specified period of time. - Page 57 Setup and Reset Configuring Backlight Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Backlight and press [...
-
Page 58: Eco Light Sensor
Setup and Reset 6.1.2 Eco Light Sensor Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity. This menu is not available when Eco Saving is set . This menu is not available when Bright is in... - Page 59 Setup and Reset Configuring Sensitivity Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Sensitivity and press [...
- Page 60 Setup and Reset Configuring Brightness Level Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Brightness Level...
-
Page 61: Eco Saving
Setup and Reset 6.1.3 Eco Saving Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. This menu is not available when Eco Light Sensor is set. This menu is not available when Bright is in Dynamic Contrast mode. -
Page 62: Eco Icon Display
Setup and Reset 6.1.4 Eco Icon Display Configuring Eco Icon Display Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. - Page 63 Setup and Reset will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds after the sensor activates. You've saved * tree(s). A pop-up as shown above will appear when an energy tree completes while Eco Icon Display If the above picture is displayed, it means the Eco Icon Display...
-
Page 64: Menu Transparency
Setup and Reset Menu Transparency Set the transparency for the menu windows: 6.2.1 Changing Menu Transparency Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Menu Transparency and press [ ] on the product. -
Page 65: Language
Setup and Reset Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 6.3.1 Changing the Language Press [ MENU ] on the product. -
Page 66: Pc/Av Mode
Setup and Reset PC/AV Mode PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. PC/AV Mode is only available in Digital mode. 6.4.1 Configuring PC/AV Mode Press [ ] on the product. MENU Press [ ] to move to... -
Page 67: Auto Source
Setup and Reset Auto Source Activate Auto Source. 6.5.1 Configuring Auto Source Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Auto Source and press [ ] on the product. -
Page 68: Display Time
Setup and Reset Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 6.6.1 Configuring Display Time Press [ ] on the product. -
Page 69: Key Repeat Time
Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.7.1 Configuring Key Repeat Time Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. -
Page 70: Customized Key
Setup and Reset Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. -
Page 71: Off Timer On/Off
Setup and Reset Off Timer On/Off Enable or disable the off timer that automatically powers off the product. 6.9.1 Configuring Off Timer On/Off Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. -
Page 72: Off Timer Setting
Setup and Reset 6.10 Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is only available when Off Timer On/Off is set to On. -
Page 73: Reset
Setup and Reset 6.11 Reset Return all the settings for the product to the default factory settings. 6.11.1 Initializing Settings (Reset) Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Reset... -
Page 74: Information Menu And
INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION Press [ ] on the product. MENU Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR Analog SIZE&POSITION... -
Page 75: Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center 8.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. - Page 76 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 82).
- Page 77 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting.
- Page 78 Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Select Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Select Control Panel Display Settings Advanced...
- Page 79 Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and resolution? Themes Display Settings and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize...
-
Page 80: Specifications
Specifications General Model Name S22A650S S24A650S Panel Size 21.5 inches (54 cm) 24 inches (61 cm) Display area 476.64 mm (H) x 268.11 mm (V) 531.36 mm (H) x 298.89 mm (V) Synchronization Horizontal 30~81 kHz Frequency Vertical 56~75 Hz Frequency Display Color 16.7M... -
Page 81: Powersaver
Specifications This Class B device designed for home use is registered for EMC requirements and can be used in all regions. PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. -
Page 82: Standard Signal Mode Table
Specifications Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. - Page 83 Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1440 x 900 70.635 74.984 136.750 VESA, 1600 x 1200...
-
Page 84: Appendix
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com... - Page 85 (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix...
- Page 86 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA 08008 SAMSUNG (08008 726 http://www.samsung.com 7864) TOLL FREE No. SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com Appendix...
- Page 87 Appendix EUROPE SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com (GSM: 7799) KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com...
- Page 88 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
- Page 89 Appendix MIDDlE EAST MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com...
-
Page 90: Correct Disposal Of This Product
Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. - Page 91 Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB refers to a device that is a common connection point for multiple devices connected over a network.
- Page 92 Appendix Vertical Frequency One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines. A vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is also called "refresh rate"...
- Page 93 Configuring Brightness in the Startup Screen Languagey Connecting and Using a PC Connecting Headphones Connecting the Product to a PC as a USB MAGIC Contact SAMSUNG WORLDWIDE MagicRotation Auto Contrast Menu Transparency Copyright Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
- Page 94 Index Requirements Before Contacting Samsung Customer Service Center Reset Response Time Safety Precautions Sharpness Standard Signal Mode Table Terminology Index...