Zone Settings - Sony STR-DA2800ES Operating Instructions Manual
Multi channel av receiver
Hide thumbs
Also See for STR-DA2800ES:
- Service manual (214 pages) ,
- Operating instructions manual (138 pages) ,
- Activation manual (7 pages)
Table of Contents
Advertisement
Available languages
Available languages
Zone Settings
You can adjust settings for the main zone,
zone 2.
Zone Control
To turn the power on or off for
zone 2
You can turn zone 2 operation on or off.
1
Select the zone you want to turn on or
off, then press
.
2
Select “On” or “Off,” then press
.
• On
• Off
To select the output source for
each zone
You can select the source that is output to the
zone. Audio and video signals are output to
zone 2.
1
Select the zone to which you want to
output video/audio signals, then press
.
2
Select “Input,” then press
.
3
Select the input, then press
.
To adjust the volume for zone 2
If the SURROUND BACK/FRONT HIGH/
FRONT B/ZONE 2 terminals are used with a
zone 2 connection, you can also adjust the
volume of zone 2.
If you set “Line Out” to “Variable,” you can
also adjust the volume using “Zone Control.”
If you want to adjust the volume of zone 2 in
zone 2 using the remote control, see
“Operating the receiver from another zone
(ZONE 2 operations)” (page 76).
1
Select the zone for which you want to
adjust the volume, then press
.
2
Select “Volume,” then press
.
3
Adjust the volume, then press
.
Zone Setup
To preset the volume for main
zone/zone 2
You can preset the volume of turning the
power on for each zone.
1
Select the zone for which you want to
preset the volume, then press
.
2
Select “Preset Volume,” then press
.
3
Adjust the volume, then press
.
During the adjustment, the sound is output
at the volume level to which you have
adjusted it, regardless of the value of
MASTER VOLUME control.
If you select “Off,” each zone is activated at
the same volume as that in effect when you
turned the power off last time.
Note
• You cannot preset the volume in the following
cases.
– The SURROUND BACK/FRONT HIGH/
FRONT B/ZONE 2 terminals are used for the
surround back speakers or the front high
speakers, or are used with a bi-amplifier
connection.
– “Line Out” is set to “Fixed.”
Line Out
You can set the volume control for the ZONE
2 AUDIO OUT jacks to “Variable” or “Fixed.”
For details, see “Set the volume control for
zone 2” (page 75)
x Fixed
x Variable
12V Trigger
Lets you select various options for use of the
12V Trigger function.
continued
Page 109
US
Hide quick links:
Advertisement
Chapters
Table of Contents
