Upgrade The Software; Register Your Product; Check The Current Software Version; Perform The Upgrade - Philips DA1200/05 User Manual

7 Upgrade the
software
Note
•
Before you perform the upgrade, make sure that the
latest software is available on your PC and the digital
radio is correctly connected to your PC through the
USB cable.
•
Power supply must not be interrupted during the
upgrade.
•
If the upgrade fails, turn off the radio first, turn it on
again, and then redo the upgrade.

Register your product

1
Go to www.philips.com/welcome.
2
Click the link of "Register my product"
(the exact wording of this link name may
vary in different languages).
3
Log in with your account on the prompt
Web page.
• If you have no account for Club Philips,
create one first on this Web page.
4
Search your product with "DA1200/05" as
the keyword.
5
Click the link of search result to access the
Web page for registering your product.
6
Fill in necessary information about this
product to complete the registration.
» With the registration, you can get
information about software update and
product support at this Web page or
via your mailbox that is registered as
the account for Club Philips.
EN
10
Check the current software
version
Follow the steps to check the version of current
software on your product.
1
Press DAB/FM to switch to radio mode.
2
Press MENU to access the menu.
3
Press / to select [System] (system),
and then press OK.
4
to select [SW version]
Press /
(software version), and then press OK.
» The version of current software scrolls
on the display panel

Perform the upgrade

1
Go to www.philips.com/welcome.
2
Log in with your account for Club Philips.
» Support information about your
registered product is displayed.
3
Click the link of "Firmware Upgrade
Readme File" (the exact wording of this
link name may vary in different languages).
4
Read and understand the instructions on
software upgrade.
5
Follow the instructions to download the
upgrade packet and complete the upgrade.