About Shooting Distance Information Slider; Correcting Multiple Images At A Time - Canon EOS 20Da Instruction Manual

About Shooting Distance Information Slider

When correcting RAW images shot with the cameras in the table below,
if shooting distance information has been saved to the image, the slider
is set automatically according to this shooting distance information.
However, if no shooting distance information is saved to the image, the
slider is set automatically to the right end at infinity position and a [<!>]
appears above the slider.
If the image's shooting distance is not infinite, you can minutely adjust
the distance by operating the slider while looking at the screen.
EOS-1D Mark IV EOS-1Ds Mark III
EOS 5D Mark II EOS 7D
EOS 50D EOS 40D
EOS REBEL EOS DIGITAL REBEL
T1i/500D
XSi/450D
When correcting RAW images shot with the cameras in the table
below, it is set automatically to the right end at infinity position. You
can then minutely adjust the distance by operating the slider while
looking at the screen if the shooting distance is not infinite.
EOS-1D Mark II N EOS-1Ds Mark II
EOS-1Ds EOS-1D
EOS 30D EOS DIGITAL REBEL
XTi/400D DIGITAL
For RAW images shot with MP-E 65mm f/2.8 1-5x Macro Photo or EF
50mm f/2.5 Compact Macro with Life Size Converter EF, the slider
indicator changes to [Magnification factor].
[Shooting distance information] slider is applied to all the correction
items with check marks.

Correcting Multiple Images at a Time

Select multiple images to correct in the main window. Display tool
palette by clicking the [Tool palette] button
perform correction procedures
can apply the same corrections to all the images selected in the main
window.
Also, you can apply same corrections by copying the recipe of the
corrected image and pasting it onto the multiple images (p.41).
Some noise appeared in the periphery of an image after
EOS-1D Mark III
correcting [Peripheral illumination]
EOS 60D
You can reduce the noise by using luminance and/or chromatic noise
EOS REBEL
reduction of the noise reduction function (p.62). However, if you had
T2i/550D
applied high amount of [Peripheral illumination] correction to the
images that have been shot at night or with a high ISO speed, the
EOS DIGITAL REBEL
noise might not be reduced.
XS/1000D
The image appears with less resolution after correcting
[Distortion]
You can make the image similar to the one before correction by
applying more sharpness with the sharpness adjusting function
(p.31).
The colors of the image became weaker after correcting [Color
blur]
EOS-1D Mark II
You can make the image similar to the one before correction by
EOS 5D
adjusting the color tone
make the color deeper.
_
The result of [Color blur] correction cannot be detected
[Color blur] correction is effective for correcting blue or red color blur
which occurs at the edge of the highlighted area of an image. If
conditions do not match, correction cannot be made.
(p.65)
Additional information
(p.29) and/or the color saturation
The periphery of the image may be truncated when [Distortion]
correction is made.
For a list of the [Lens aberration correction] window functions, refer
to p.121.
(p.110) in the toolbar. If you
when tool palette is displayed, you
(p.94) to
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Advanced 3
Image Editing
and Printing
Processing 4
Large Numbers
of Images
Editing
5
JPEG/TIFF
Images
Reference
Index
66