Narrowing Down The Scenes Shown In The Index Screen - Canon 4316B001 Instruction Manual

Narrowing Down the Scenes Shown in the Index Screen

From the [Original] index screen, you can narrow down the scenes
shown, leaving only scenes that were recorded on a specific date or
only those scenes in which people's faces were detected.
Operating modes:
Showing Only Scenes that Contain People's Faces
This will narrow down the scenes shown in the [Original] index screen,
leaving only scenes that were recorded using face detection (0 64)
and in which people's faces were detected.
1 Open the [Original] index screen, if it is not displayed.
[b]
2 Narrow down the scenes shown.
[y All Scenes]
• [o Faces] appears instead of [All Scenes]. To show all scenes again,
touch [y o Faces] and then [All Scenes].
Showing Only Scenes Recorded on a Specific Date
This will narrow down the scenes shown in the [Original] or [Video
Snapshot] → [Original] index screen, leaving only scenes that were
recorded on the date you choose.
1 Open the [Original] or [Video Snapshot] → [Original] index screen.
[b]
[Original]
8
[Original]
8
[o Scenes with Faces]
8
[Original] or [b]
8
[Video Snapshot]
8
53
Video