Download Print this page

Samsung WT10S2 Owner's Instructions

Hide thumbs Also See for WT10S2:

Advertisement

Quick Links

BEFORE USING THE WASHER
Remove the cap-hose from the drain
hose.
CAUTIONS
Be sure that the washer is grounded.
To avoid electrical shock,use
a metal pipe for the ground
connection. But, don't ground
the washer with gas pipes or
telephone lines to avoid to
dangers of explosion or lightning strike.
Do not put your hands into the spin
dryer basket when it is spinning.
Your fingers can be caught
by spinning laundry and
damaged.
Never allow children to operate
or play with the washer.
Children playing with the washer
may accidentally fall into the
washing tub.
PRECAUTIONS WHEN OPERATING
Don't use excessively hot water.
(50˚C or more)
Plastic parts may be deformed or damaged.
Also, clothing may be deformed or decolored.
Before washing,check all pockets.
If nails or pins remain in pockets,they may
damage the washer or clothes.
Close the water tap a little if the
water pressure is too high.
In case of pump drained washer,
remove the cap-hose from
the drain hole.
Disconnect the power cord from the
power supply when not in use.
Ventilation opening must not be obstructed
by carpeting when the washing machine is
installed on a carpeted floor.
If the supply cord of this appliance is damaged,
it must only be replaced by a repair shop
appointed by the manufacturer,because
special purpose tools are required.
To avoid overfilling and damages this appliance
must be filled with the operator present using a
moderate water supply pressure only.
Be sure to cover with the inner
cover on laundry before spinning.
This prevents laundry from
being tossed out and damaged.
To avoid water splashes,
close the wash tub lid.
Never splash water on the control panel.
1

DESCRIPTION OF PARTS

2

Advertisement

loading

Summary of Contents for Samsung WT10S2

  • Page 1: Description Of Parts

    BEFORE USING THE WASHER DESCRIPTION OF PARTS Remove the cap-hose from the drain In case of pump drained washer, remove the cap-hose from hose. the drain hole. CAUTIONS Be sure that the washer is grounded. Disconnect the power cord from the To avoid electrical shock,use power supply when not in use.
  • Page 2: Control Panel

    CONTROL PANEL WASHING PROCEDURE SWT90C1(P) / SWT90C2(P) (A)Type TO WASH WT10S0(P) /WT10S1(P) /WT10S2(P) Before starting washing, ; Connect the water supply hose and open the water tap. check the following - Lay the drain hose down toward a sinkhole.(In case no drain pump) - Place the drain hose in sink or bath.(In case drain pump) WATER SELECTOR CYCLE SELECTOR...
  • Page 3: Over Flow Rinse

    WASHING PROCEDURE SPIN DRY OVER FLOW RINSE 1. Transfer the clothes into the spin basket 3. Close the spin dryer lid. and arrange the clothes evenly. (A)Type (B)Type 1. Keep suppling water 1. Keep suppling water (adjust water pressure (adjust water pressure to ensure that the amount of water supplied to ensure that the amount of water supplied does not exceed that water drained.)
  • Page 4: Laundry Guide

    LAUNDRY GUIDE INSTALLATION AMOUNT OF CLOTHES ENVIRONMENT CHANGING THE POSITION OF THE DRAIN HOSE Water Level Middle High Before attempting to change the position of the drain hose, Leave some space Shirts(Synthetics) 22 Pieces 29 Pieces 35 Pieces Space at last 15cm between the washer disconnect the plug from the outlet.
  • Page 5: Specification

    IF YOU NEED HELP. Do not hesitate to call your local samsung service center. Owner’s Instructions They will be willing to help you. Be sure to give them your name,address,telephone number and the purpose of the call. SW-903(P)/SWT90C1(P) / SWT90C2(P)