Table of Contents
Advertisement
DJ68-00068X
8/23/01 4:08 PM
ASSEMBLING THE VACUUM-CLEANER READY FOR USE
1) Connect the suction hose to the suction tube.
3) Connect the nozzle to the suction tube.
4) Grip the body connector with one hand and
squeeze the tube in an inward direction.
POWER CORD
1) PULLING OUT
The power cord is long enough to be drawn out for
convenience.
2) REWINDING
When you have finished cleaning, disconnect the plug
from the electrical outlet and simply press the cord
rewind button lightly with your toe.
NOTE :
When removing the power cord from the electrical outlet, grasp the plug, not the cord.
NOTE :
For your convenience, the handle has two functions. It can be used as a "handle" to carry
the unit. It is also the cord rewind button that can be used to rewind the power cord.
Page 4
2) Connect the suction tubes together (depending
on model).
OPTION :
EXTENDING : Holding the narrow part of
the telescopic tube with one hand, pull the
handle in the opposite direction with your
other hand.
➁
SHORTENING : Holding the narrow part of
the telescopic tube with one hand, push the
handle towards it using the other hand.
- Adjustable telescopic tube not available
with all models.
3
Advertisement
Table of Contents
