Troubleshooting - Samsung VAC7049G Operating Lnstructions

3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag into
the carrying bag, and then insert it in its origi-
nal position
NOTE:
Used dust bag can be sealed by remov-
ing the film from the paper and sticking
the latter over the suction opening.
FOR CLOTH FILTER BAG
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
MAINTENANCE OR REPLACEMENT OF THE FILTERS
1) INLET-FILTER.
• Open the dust cover.
• After detaching the filter, wash it lightly with water, dry
it in the shade, then insert it in its original position.
• Close the dust cover.
2) OUTLET-FILTER.
• Open the dust cover, then pull the grille-filter
forward.
• Remove and replace the eshausted outlet-filter.
• Push the grille filter back, then close the dust cover.

TROUBLESHOOTING

PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
4) Press the dust cover down gently until the
clamper relocks.
CAUSE
No power supply.
Filter, nozzle, suction hose or
tube is blocked.
Check that the cord is
not twisted or wound unevenly.
-7
EN
REMEDY
Check cable, plug and socket.
Remove the object.
Pull the cord out 2~3 m. & push
down the Cord rewind button.