Intelligent Picture Control
The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the USER SET option.
OPTIONS
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿
OK
END:
❷
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
IPC option is selected.
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
NICAM
:ON
IPC
:ON
❿
END:
❷
❿
5
Press the
button to select the IPC (intelligent
picture control) option.
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
6
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
➛
❿
7
Press the
or
buttons until the picture is
displayed according to your preferences.
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
8
On completion, press the MENU button again.
➛
❿
,
or
,
buttons to
❷
MENU
or
❷
buttons, until the
MENU
❷
ENG-20
Selecting the Colour Mode
Before recording or playing back a cassette, you can
select the required system standard.
When you playback an NTSC-recorded tape
on this VCR make a setting on the colour
system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
COLOUR SYSTEM option is selected.
❿
5
Press the
button to select AUTO
MESECAM
B/W or NT3.58
AUTO When playing back a cassette, the system
standard is automatically selected by the
VCR.
B/W
Black and White
6
On completion, press MENU twice to exit the menu.
➛
❿
,
or
,
buttons to
❷
or
❷
buttons, until the
PAL
NT4.43
NTPB.