Choosing Your Language; Setting The Vcr Output Channel; Selecting The Rf Out Sound Mode - Samsung SV-4000 Instruction Manual

Choosing Your Language

You can change the language in which information is
displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the LANGUAGE SET option.
PROG OPTIONS INSTALL
LANG
CLOCK BONUS LANG
LANGUAGE SET
➛❿
OK END:
❷
3
Press the OK button to select this option.
Result: The LANGUAGE SET menu is displayed.
4
Select the required language by pressing the
❷
or buttons.
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result: From now on, all the on-screen information
will be displayed in the language selected.
Setting the VCR Output Setting the VCR Output
Channel Channel
Your VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find
the pictures. Also, you can change the VCR output
channel to adjust the frequency in which information is
displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿
OK END:
❷
➛ ❿
,
or , buttons to
❷
MENU
➛ ❿
,
or , buttons to
❷
MENU
ENG-12
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
VCR OUTPUT CH option is selected.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❿
END:
❷
5
Select the required output channel by pressing the
➛ ❿
or buttons.
6
On completion, press MENU twice to exit the menu.
Then tune your television again (see page 10).
Selecting the RF OUT Sound
Mode
You must choose the sound mode (G or K) according to
the TV set connected to your VCR.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the LANGUAGE SET option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
❿
END:
❷
4
Press the corresponding
the TV SYSTEM option is selected.
❿
5
Press the button to select G or K.
6
On completion, press MENU twice to exit the
menu.
or buttons, until the
❷
MENU
➛ ❿
,
or , buttons to
❷
MENU
❷
or buttons, until