Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung CT-17K30ML Owner's Instructions Manual

Hide thumbs Also See for CT-17K30ML:
Table of Contents

Advertisement

I
N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
Incoming Cable
Splitter
Incoming Cable
English - 11
This terminal might be labeled
"ANT OUT", "VHF OUT" or simply,
"OUT".
This terminal might be labeled
"ANT IN", "VHF IN" or simply,
"IN".
Splitter
Cable Box
Continued...

Advertisement

Table of Contents
loading

Table of Contents