Samsung SC-M105S Owner's Instruction Book page 115

Hide thumbs Also See for SC-M105S:
Table of Contents

Advertisement

Miscellaneous Information:
ENGLISH
Connecting the CAM with other Devices
Disconnecting USB Connection
After completing the data transfer, you must disconnect the cable in
the following way.
1. Select the removable disk icon and click the right mouse button to
select 'Safely Remove Hardware'.
2. Select 'Stop' and disconnect the USB cable when the pop-up
screen disappears.
Notes
✤ If you disconnect the USB cable from the PC or the CAM during the data
transfer, the data transfer will stop and the data may be damaged.
✤ If you connect the USB cable to a PC using a USB HUB or with other
device at the same time, it might cause conflict and may not work properly.
If this occurs, remove all other devices and try the connection again.
✤ The CAM may operates abnormally in the recommended system
environment depending on the assembling of PC.
For example, the video file is played abnormally.
✤ Once you select the USB 2.0 MassStorage, USB 1.1 MassStorage,
PC-Cam or PictBridge, you cannot select the modes. Disconnect the USB
cable or turn on the CAM again to select the modes.
✤ If you disconnect the USB cable, the message 'Now refresh file list'
appears for 1 second.
✤ All operation mentioned on the page 102 may not guaranteed in the system
environment.
114
114
Sonstige Informationen:
Camcorder an andere Geräte anschließen
USB-Verbindung trennen
Entfernen Sie das USB-Kabel nach Abschluss der Datenübertragung
auf folgende Art und Weise:
1. Klicken Sie mit der rechten Maustaste auf das Symbol des
Wechseldatenträgers, und wählen Sie aus dem Kontextmenü die
Option 'Hardware sicher entfernen'.
2. Wählen Sie 'Beenden' und entfernen Sie das USB-Kabel, sobald
das Pop-Up-Fenster ausgeblendet wird.
Hinweise
✤ Wenn Sie das USB-Kabel zwischen Camcorder und PC während der
Datenübertragung abziehen, wird die Datenübertragung abgebrochen.
Dabei können Daten beschädigt werden.
✤ Wenn Sie das USB-Kabel über einen USB-Hub an den PC anschließen
oder gleichzeitig andere USB-Geräte angeschlossen sind, funktioniert die
Verbindung möglicherweise nicht einwandfrei. Trennen Sie in diesem Fall
alle anderen USB-Geräte vom PC, und stellen Sie die USB-Verbindung
erneut her.
✤ Abhängig von der Bauart des Computers arbeitet der Camcorder in der
empfohlenen Systemumgebung möglicherweise nicht einwandfrei.
Zum Beispiel können Probleme bei der Wiedergabe von Videodateien
auftreten.
✤ Nachdem Sie USB-2.0-Massenspeicher, USB-1.1-Massenspeicher, PC-
Kamera oder PictBridge ausgewählt haben, können Sie den Modus nicht
mehr ändern. Entfernen Sie das USB-Kabel, oder schalten Sie den
Camcorder erneut ein, um den Modus auszuwählen.
✤ Beim Entfernen des USB-Kabels wird kurzzeitig die Nachricht 'Now refresh
file list'(Dateiliste wird aktualisiert) angezeigt.
✤ Es wird keine Garantie übernommen, dass die auf Seite 102
beschriebenen Funktionen in Ihrer Systemumgebung ordnungsgemäß
funktionieren.
DEUTSCH

Advertisement

Table of Contents
loading

Table of Contents