Troubleshooting; Self Diagnosis Display; Moisture Condensation - Samsung VP-D97I Owner's Instruction Book

Digital video camcorder, auto focus, charge coupled device, liquid crystal display
Hide thumbs Also See for VP-D97I:
Table of Contents

Advertisement

ENGLISH

Troubleshooting

Troubleshooting
Before contacting a Samsung authorized service centre, perform the
following simple checks.
They may save you the time and expense of an unnecessary call.

Self Diagnosis Display

Display
Blinking
Informs that...
slow
the battery pack is almost
discharged.
slow
When the remaining time on the
TAPE END!
tape is about 2 minutes.
TAPE END!
no
the tape reached its end.
TAPE!
slow
there is no tape in camcorder.
slow
the tape is record protected.
PROTECTION!
.... D
slow
the camcorder has some mechanical
L
fault.
C
R
slow
moisture condensation has formed
in the camcorder.

Moisture Condensation

If the camcorder is brought directly from a cold place to a warm
place, moisture may condense inside the camcorder,
on the surface of the tape, or on the lens. In this condition, the tape
may stick to the head drum and be damaged or the unit may not
operate correctly.
To prevent possible damage under these circumstances, the
camcorder is fitted with a moisture sensor.
If there is moisture inside the camcorder,
If this happens, none of the functions except cassette ejection will
work.
Open the cassette compartment and remove the battery.
Leave the camcorder for at least two hours in a dry warm room.
105
Action
Change to a charged one.
TAPE END!
Prepare a new one.
TAPE END!
Change to a new one.
TAPE!
Insert a tape.
PROTECTION!
If you want to record,
....D
release the protection.
1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If unresolved contact your
local service representative.
see below.
(DEW) is displayed.
2
L
C
R
1.
2.
OFF
3.
4.
*
DEW
2
2
105
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vp-d99iVp-d93Vp-d93iVp-d97Vp-d99

Table of Contents