Maintenance; After Finishing A Recording - Samsung VP-D97I Owner's Instruction Book

ENGLISH

Maintenance

After finishing a recording

At the end of a recording you must remove the power source.
When recording with a Lithium Ion Battery Pack, leaving the pack on
the camcorder can reduce the life span of the battery.
Hence, it should be removed from the camcorder.
1. Slide the TAPE EJECT switch in the direction of
the arrow.
Opening the cassette door ejects the tape
automatically.
Please wait while the tape is completely
ejected.
2. After removing the tape, close the door and store
the camcorder in a dust free environment.
Dust and other foreign materials can cause
block-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
Hold down the BATTERY RELEASE button and slide the battery
pack in the direction of the arrow.
102 102
2
1
3
3.
4.
1. TAPE EJECT
2.
OFF
BATTERY RELEASE
102