Download Print this page
Philips DTR2000/00 Technical Specifications
Philips DTR2000/00 Technical Specifications

Philips DTR2000/00 Technical Specifications

Digital terrestrial receiver
Hide thumbs Also See for DTR2000/00:

Advertisement

Quick Links

Digital Terrestrial Receiver
More, easier, better...
·
Access to Finnish Pay-TV Services and Free-to-Air Channels
Access to free to air channels
·
Fast Zapping
Channel changes within one second
·
Automatic Installation
Installs new channels within 30 seconds
·
Euphoria
User friendly interface
·
Access to Digital Radio through your TV
·
Digital Audio Output
To enjoy surround sound through your DOLBY 5.1 hifi system
·
2 SCART Sockets
Quality SCART cable included
RGB on SCART to ensure best possible picture quality to TV
·
Parental Lock
·
Low power mode
Less than 1W power consumption
2000
2000
Digital Terrestrial Receiver
DTR
DTR
Technical Specifications
Video Decoding
-Pay TV ready (Conax embedded)
Auto
-MPEG-2 DVB compliant up to MP@ ML
Install
-Video bit rate : up to 15 Mbit/sec
-Video format : 4 :3 (letter box if source is in
16:9)and 16 :9
-Resolution : up to 720x576 pixels
Audio Decoding
-MPEG layer I / II
Ease of Installation
- Automatic program installation via
euph@@@@@@@ria
scanning
- Automatic program list update
-Program editing for personalised
I I
I I
installation (delete, add, move)
Ease of Use
- Direct access TV & Radio modes- 4 Fav
list for TV programs
- 4 Fav list for Radio programs
- Automatic recording via:
Timer programming and Easy recording
for Philips VCR and DVD+/- RW
- Now & Next ESG
- Electronic Program Guide per channel
when broadcasted
Operation / Features
- Direct access TV & Radio modes
- Free to air reception and Pay TV ready
-Subtitles
-Parental lock with PIN code
-Full remote controlled
- Menu controlled installation and
operation using On Screen Display
- 8 event VCR timers
- Automatic VCR play back : Audio L/R +
CVBS or RGB / Fast blanking
-Full range RF loopthrough
- Software upgrade via over the air
download
- Low power mode
- Sleep timer
- Alternate audio tracks
DTR 2000
Application System
Accessories
Resources
-Remote control
Processor clock speed
166 MHz
Type RC19336002
SDRAM - CPU/Video-Graphics
8 MB
-Scart cable
Flash memory
4 MB
-User manual
-Worldwide Guarantee booklet
-Batteries : 2 x 1.5V type AA/R06
Terrestrial Antenna Interface
-RF cable
-RF input : IEC 169-2 female connector
-Mains cord
-RF output (bypass): IEC 169-2 male
connector
Miscellaneous
-Temperature range (°C)
Reception-Demodulation
Operating
-Demodulation type: COFDM 2K / 8K
Storage
- Network :
MFN /SFN
-Mains:
-Input frequency range :
VHF III & UHF IV / V
-Power consumption:
-Loopthrough frequency range (MHz):
Standby consumption: 6 W max
47 - 862 MHz
-Low power mode:
-Weight
De-Scrambling
Including packaging
Type: DVB
-Dimensions:
Implementation: embedded
Product
Smart card
: 1 for CA
(not supplied)
Packaging
CA system: Conax
Note: subcription is required to watch
Pay TV.
Connections
TV SCART
Output : CVBS PAL or SECAM, RGB ,
Slow blanking , Fast blanking, S-Video
(for LCD projector) Controlled audio L/R
VCR SCART
Input : CVBS PAL or SECAM, Slow
blanking , Audio L/R, RGB / Fast blanking
Output : CVBS PAL or SECAM, Slow
blanking during timer if "Prepare
Record" mode is activated, SVHS, Audio
L/R
Audio CINCH:
Analog audio output: L / R / Digital audio
output: PCM+DOLBY 5.1
Serial Interface:
RJ 9
Smart card reader
Type: ISO 7816
Date of issue 2003-12-08
Specifications are subject to change without notice
Trademarks owned by Royal Philips Electronics
2003 © Royal Philips Electronics - All rights reserved
www.philips.com
+5 to 45
-10 to +70
230 V ~ +/-10%
50 Hz
10 W max-
1 W max
1.450 kg
2.500 kg
260x220x60 mm
365x305x140 mm

Advertisement

loading

This manual is also suitable for:

Dtr 2000