Changing The Settings; Returning To The Default Settings - Panasonic AJ-D810A Operating Instructions Manual

Displaying Menus on the Viewfinder Screen
Operations on SUB menus
Selecting the desired item
1
Press the SHIFT/ITEM button.
Each time this button is pressed, the cursor (arrow) which indicates the selected item moves
to the next item.
Movement order
The item can also be selected using the UP and DOWN buttons as follows.

Changing the settings

Press the UP button to increase the setting.
ÁThe setting is incremented by 1 level each time
the UP button is pressed.
Press the DOWN button to decrease the setting.
ÁThe setting is decremented by 1 level each time
the DOWN button is pressed.
Changing the ON/OFF selection
The setting switches to ON or OFF each time the UP (or DOWN) button is pressed.

Returning to the default settings

Align the arrow with READ FACTORY DATA on the "INITIALIZE" SUB menu page of the MAIN
menu screen 4 of 4.
When the UP (or DOWN) button is now pressed, the initial (factory) settings will be restored.
However, care should be taken as the camera ID cannot be returned to the default settings.
Quitting the menu
Set the MENU SET/OFF switch to OFF.
ÁThe setting menu disappears from the viewfinder screen and the displays indicating the unit's
current status appear at the top and bottom of the viewfinder screen.
¢| RO P {
Cursor
†
MA S T E R
MA S T E R
MA S T E R
R G A I N
B G A I N
R P E D E S T A L
G P E D E S T A L
B P E D E S T A L
– 54 –
:
P E D µ 0 0 0
:
D T L µ 0 0
:
G AMMA 0 4 5 .
:
µ 0 0 0
:
µ 0 0 0
:
µ 0 0 0
:
µ 0 0 0
:
µ 0 0 0
SHIFT/
PAGE
ITEM
TCG
F-RUN FRONT
SET
REAR
UP
R-RUN
CH 1
CUE
REAR MIC POWER REAR MIC POWER
MENU
DOWN
CH 1
SET
MIX
OFF
CH 2
AUDIO IN
MIC
MIC
LINE
CH 2
ON
OFF