Sending A Data Or Fax Call; Receiving A Data Or Fax Call - Motorola Timeport 270c Reference Manual

Sending a Data or Fax Call

You can connect your phone to a computer or hand-held device to send data or a fax from the
connected device.
Use this feature to transfer data from your computer onto another device, and to synchronize
phonebook and datebook information between your phone, computer, and/or hand-held device.
Connect your phone (see "Connecting Your Phone to an External Device" on page 73) and do the
following:
Do This
1 Check the phone
2 Open the application
on your computer
3 End the transfer on
your computer

Receiving a Data or Fax Call

You can connect your phone to a computer or hand-held device to receive data or a fax.
Use this feature to transfer data to your computer from another device.
Set Up Your Phone
Before you receive a data or fax call, you must configure your phone for the incoming call type and
connect the phone to the device that will receive the call.
Find the Feature
Do This
CHANGE
1 Press
2 Press S
SELECT
3 Press
4 Connect your phone to
the device
Data and Fax Calls
To
make sure that the phone is connected and powered on
place the call through the application (such as dial-up-networking or fax)
Note: You cannot dial data or fax numbers through your phone's
keypad. You must dial them through your computer.
close the call and connection when the transfer is complete
M Settings
>
To
+
Next Call
( ) select the
Data In Only
scroll to
Selecting either of these options mutes the earpiece and routes the next
incoming call to the connected device.
+
( ) set the format for the next incoming call
enable the data or fax transfer
(See "Connecting Your Phone to an External Device" on page 73.)
Connection Incoming Call
> >
menu option
Fax In Only
or
75