Setting The Detection Level Of Sync Recording; Delayed Recording For Starting Recording After A Set Delay - Kenwood MGR-A7 Instruction Manual

Setting the detection level of sync recording

When sync recording using the built-in microphones or an external microphone is set,
the level at which recording starts can be set as described below.
The default sync detection level set before this unit left the factory is "Low". In an
environment with high ambient noise (in which the no-input status cannot be detected),
set the detection level to "Mid" or "High".
High When the ambient noise is high, etc., increases the level at which the start of music is detected.
Mid
Low Detects the start of music at a low level.
1
Select "Sync level" from the pop-up menu.
(Built-in microphones or external microphone only)
2
Select the sync level.
High
Mid
Low
To Home screen
Recording format
Recording destinat
Sync rec
Sync level
Enter Enter
Delayed recording for starting recording
after a set delay
When recording audio using the built-in microphones or an external microphone, the
start of recording can be delayed from the moment the record button is performed.
This makes it possible to avoid recording the button operation sound, etc.
1
Select "Delay rec" from the pop-up menu.
(Built-in microphones or external microphone only)
2
Specify the timer period.
Off
5sec
10sec
30sec
60sec
3
Start recording.
• To deactivate the delay recording, select "Off" in step 2.
• The default delayed recording mode set before this unit left the factory is "Off".
31
Recording format
Recording destinat
Sync rec
Sync level
Delay rec
Set from 5, 10, 30 and 60 seconds.
Enter Enter
See page 32.
English