Ambience Effects; Surround Modes - Kenwood KRF-V4070D Instruction Manual

Hide thumbs Also See for KRF-V4070D:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Ambience effects

This receiver is equipped with listening modes that allow
you to enjoy an enhanced sonic ambience with a variety of
video sources.
In order to obtain the optimum effect from the surround
modes, make sure to input the proper speaker settings
beforehand.

Surround modes

The below speaker placements are for 5.1 channel surround sound
system which are;
• Dolby Digital
• Dolby Pro Logic II
• DTS
• DSP
• DVD 6-channel (For KRF-V5070D only)
TV / SCREEN
SW
SL
L
Front left speaker
SW
Subwoofer
C
Center speaker
R
Front right speaker
SL
Surround left speaker
SR
Surround right speaker
Manufactured under license from Dolby Laboratories. "DOLBY",
the double-D symbol and "PRO LOGIC" are trademarks of Dolby
Laboratories.
"DTS" and "DTS Digital Surround" are registered
trademarks of Digital Theater Systems, Inc.
26
EN
&
C
SR
Dolby Digital
The Dolby Digital surround format lets you enjoy up to 5.1 channels
of digital surround sound from Dolby Digital program sources (such
as Laserdisc or DVD software marked
previous Dolby surround, Dolby Digital provides even better sound
quality, greater spatial accuracy, and improved dynamic range.
Although a full set of speakers (front left, right, and center, surround
left and right, and a subwoofer) is required for true 5.1 channel Dolby
Digital surround sound, this receiver lets you enjoy Dolby Digital (and
Dolby Surround) program sources, even if you connect only the front
speakers.
Although only Dolby Digital soundtracks incorporate a separate low
frequency channel, connecting a subwoofer will also improve deep
bass performance in the other surround modes.
The indication "LFE" appears in the display when a signal is being
input for this channel.
Dolby PRO LOGIC II
Dolby Pro Logic II was designed specifically to provide a new sense
of spatiality, directionality and articulation of sounds from Dolby
Surround encoded sources (such as video and Laserdisc software
marked
). This is achieved with an intelligent, built-in
feedback logic design, a matrix surround decoding and the decoding
of stereo, full bandwidth surround outputs. The PRO LOGIC II modes
programmed into this receiver are "MOVIE", "MUSIC" and "PRO
LOGIC". The "MOVIE" mode of the PRO LOGIC II has preset
characteristics to produce a calibrated, high-level surround sound
playback while the "MUSIC" mode has user-adjustable characteristics
to offer the three optional controls, like "Dimension", "Center
Width" and "Panorama" modes to allow optimization of the
soundfields as desired. The "Dimension" control allows the user to
gradually adjust the soundfield either towards the front or towards
the rear; the "Center Width" control allows various adjustment of the
left-center-right speakers' balance; the "Panorama" extends the
front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
Note
LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep
bass sound effects.
). Compared with

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krf-v5070dKrf-v5570d

Table of Contents