Download  Print this page

Kenwood HM-438USB Instruction Manual page 18

Compact hi-fi component system
Hide thumbs

Advertisement

Using the cassette
Program recording from a CD/MP3-CD/
WMA-CD/USB device
Desired CD tracks/MP3 fi les/WMA fi les can be
programmed in the desired sequence and recorded
onto a tape.
1
Insert a blank cassette tape into the tape deck.
2
Press the desired source button to select the
source you wish to record from.
For CD/MP3-CD/WMA-CD : Press CD (CD/USB)
button to select CD input.
For USB device : Press USB (CD/USB) button to
select USB input.
3
Insert a disc or an USB device and make sure
that the unit is in stop mode.
4
Program the desired sequence of CD tracks/
MP3 fi les/WMA fi les.
See page 12 and 13 for programming procedure.
5
Press REC (rec) button to set the unit into
recording standby mode.
The icon "REC. " appears on the display.
6
Press PLAY/PAUSE 6 (6) button to begin
recording.
The icon "SYNC" appears on the display.
• To end recording, press STOP 7 (7) button.
18
EN

Advertisement

loading

  Related Manuals for Kenwood HM-438USB