Using The Cassette; Playing A Cassette Tape; Recording On A Cassette Tape - Kenwood HM-437MP Instruction Manual

Using the radio
4 Press PTY button on the remote control to
select your desired program type.
Program type table
Program Type Name
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied Speech
Pop Music
Rock Music
Easy Music
Light Classical Music
Serious Classical Music
Other Music
Weather
Finance
Children's Program
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
5 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to start searching.
Notes:
• Under certain receiving conditions, it may take more
than 1 minute to complete the search.
• If the desired program type cannot be found, "NO
MATCH" is displayed, then after several seconds
the display returns to the original display.
14
EN
Display
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT

Using the cassette

Playing a cassette tape

1 Press TAPE button to TAPE.
2 Press the area marked push open to open the
cassette compartment door.
3 Insert cassette tape into the compartment with
the open edge facing down.
4 Close the door securely.
5 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to move tape to the desired starting point.
6 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin playing the tape.
7 Press volume buttons (VOLUME UP or
DOWN button on the remote control) and press
EQ/X-bass button (EQ/X-BASS on the remote
control) to desired listening level.

Recording on a cassette tape

You can record from the radio or the CD player.
For best recording, use a normal bias tape (Type 1
only).
Recording from the radio
1 Insert a cassette tape into the tape compart-
ment and close door.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to TUNER and
select a radio station.
3 Press rec button (REC/DEMO button on the
remote control) to set the unit into recording
standby mode.
The icon "REC. " appears on the display.
4 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin recording.
5 Press 7 button to end recording.
6 To turn off radio, press TAPE button to TAPE.