Random; Repeat; Intro Scan; Using The Rds/Display/Demo Button - Kenwood HM-337-SG Instruction Manual

Using the CD
Press program button on the unit ( PROGRAM
button on the remote control) in stop mode to
review the program sequence.
5 Press 6 button (6 PLAY/PAUSE button on
the remote control) to play the programmed
tracks.
If you press repeat button on the unit (REPEAT
button on the remote control) during pro-
grammed playback, the current track or all pro-
grammed tracks will be played repeatedly.
The icon "REPEAT" or "REPEAT ALL " and the
icon "PROGRAM" will appear on the display.
6 Press 7 button (STOP 7 button on the remote
control) once to stop program playback or twice
to clear the program.
The icon "PROGRAM" will disappear from the
display.
Notes:
• "P"represents PROGRAM.
• The program is automatically cleared as soon as the
CD door is opened.
• The function of program setting is disabling in PLAY/
PAUSE mode.

Random

You can play all the tracks in random order.
1 During playing, pause or stop mode, press
RANDOM button on the remote control to
enable random play mode.
The icon "RANDOM" will appear on the dis-
play.
2 To exit random mode, press RANDOM button
again. The icon "RANDOM" will disappear
from the display.
Note:
If the program function enabled or the repeat function
is set on, will disable the random play mode.
10
EN

Repeat

You can play the current track or the whole disc
repeatedly.
To repeat all the tracks
Press repeat button on the unit (REPEAT button
on the remote control) once in play or pause mode.
The icon "REPEAT ALL " will appear on the dis-
play.
• All tracks/files will be repeated continuously.
• To cancel repeat play, repress repeat button
on the unit (REPEAT button on the remote con-
trol) twice.
To repeat a single track
Press repeat button on the unit (REPEAT button
on the remote control) twice in play or pause
mode.
The icon "REPEAT" will appear on the display.
• To cancel repeat play, repress repeat button
on the unit (REPEAT button on the remote con-
trol) once.

Intro scan

This function let you listen to the first 10 seconds
of each track throughout the disc.
Press INTRO button on the remote control to start
scanning, and the icon "INTRO" will appear on
the display.
To stop the intro scan
Press INTRO button on the remote control again.
The unit enters normal play mode and starts play-
ing from where you stop the scanning.
Using the RDS/display/demo but-
ton
Pressing RDS/display/demo button on the unit
(RDS/DISPLAY on the remote control) shows
various display information of the disc, such as
time information of the current track or a whole
disc, program number during program play and
etc.