The Front Panel; Figure 3-2: Front Panel - Linksys SPA2102-NA User Manual

Phone Adapter with Router

The Front Panel

The Phone Adapter's LEDs, which inform you about network activities, are located on the front panel.

Figure 3-2: Front Panel

Power Green. The Power LED lights up when the Phone Adapter is powered on and connected to
the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED
also flashes when the Phone Adapter is booting up or upgrading its firmware.
INTERNET Green. The INTERNET LED lights up when there is an active connection through the port. If
the LED is flashing, then there is traffic moving through that port.
PHONE 1/2 Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or
registered connection to babyTEL through the corresponding port. It flashes when the
phone is being used or is off the hook.
8
Proceed to "Chapter 4: Getting Started."
Chapter 3: Getting to Know the Phone Adapter
The Front Panel