Linksys SPA2102-NA User Manual page 44

Phone adapter with router
Hide thumbs Also See for SPA2102-NA:
Table of Contents

Advertisement

Phone Adapter with Router
Call Back Active. This indicates whether a call back request is in progress.
Last Called Number. Displayed here is the last number called.
Last Caller Number. Displayed here is the number of the last caller.
Mapped SIP Port. Shown here is the port number of the NAT mapped SIP port.
Calls 1 and 2 have the same status information available.
Call 1/2 State. Displayed here is the status of the call.
Call 1/2 Tone. Displayed here is the type of tone used by the call.
Call 1/2 Encoder. Displayed here is the codec used for encoding.
Call 1/2 Decoder. Displayed here is the codec used for decoding.
Call 1/2 FAX. Displayed here is the status of the fax pass-through mode.
Call 1/2 Type. Displayed here is the direction of the call.
Call 1/2 Remote Hold. This indicates whether the far end has placed the call on hold.
Call 1/2 Callback. This indicates whether the call was triggered by a call back request.
Call 1/2 Peer Name. Displayed here is the name of the internal phone.
Call 1/2 Peer Phone. Displayed here is the phone number of the internal phone.
Call 1/2 Duration. Displayed here is the duration of the call.
36
Chapter 6: Using the Web-based Utility
The Voice Tab

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa2102

Table of Contents