Download Print this page

Specifications - HP netRAID-1M Brochure & Specs

Hp netraid-1m controller for hp netservers

Advertisement

specifications

supported operating
systems
supported servers
RAID levels supported
SCSI connectors
SCSI channels
Devices per SCSI channel
SCSI device types supported
SCSI bus
SCSI data transfer rate
SCSI termination
Termination disable
Card size
Multiple cards
Bus type
Bus data transfer rate
Processor
Cache configuration
Nonvolatile RAM
BIOS
Tone generator
Warranty
Microsoft Windows NT 4.0 and Windows 2000; Novell NetWare, 5.1, 6.0; SCO OpenServer 5.x;
SCO UnixWare 7.x; and Red Hat Linux 7.0*.
* Only available on HP Server LP1000r and HP Server LP2000r
E200, E60, E800, tc2100, tc2110, tc3100, tc4100, LC3, LC2000, LH3, LH3000, LH4, LH6000,
LPr, LP1000r, LP2000r, LT 6000r, LXr 8000, LXr 8500
0, 1, 5, 10, and 50
One 68-pin, high-density internal connector; One 68-pin, very-high-
density external connector
One
Up to 14
Synchronous or asynchronous
Single-ended or LVD
Fast, Ultra, Ultra2, Ultra3
SCSI active termination
Through jumper configuration
6.875" × 4.2" (half-length PCI)
Up to six HP NetRAID family adapters (varies by server)
PCI 2.1 (32-bit bus), 33 MHz
Up to 132 MB/sec
Intel
®
i960RM @ 100 MHz
32 MB SDRAM
32K × 8 to store RAID configuration
HP NetRAID BIOS
Audible warnings indicate degraded drives, offline drives, and drive
rebuilds
1-year return to HP or system matching when installed in an
HP Netserver

Advertisement

loading