System Security Screen - Dell PowerEdge 2900 Information Update

Table 1-5. Integrated Devices Screen Options (continued)
Option
System Interrupts
Assignment
(Standard default)

System Security Screen

Table 1-6 lists new options for the PowerEdge 2900 III system.
NOTE:
Systems that are shipping in China are not equipped with TPM.
NOTICE:
Before enabling the TPM Security option, ensure that the operating
system supports TPM.
Table 1-6. New System Security Screen Options
Option
TPM Security
(Off default)
TPM Activation
Description
This field controls the interrupt assignment for PCI devices in
the system. When set to Distributed, interrupt routing is
swizzled to minimize IRQ sharing among devices.
Description
Sets the reporting of the Trusted Platform Module (TPM)
in the system.
When set to Off (default), presence of the TPM is not
reported to the operating system.
When set to On with Pre-boot Measurements, the system
reports the TPM to the operating system and stores the
pre-boot measurements (compliant with Trusted
Computing Group standards) to the TPM during POST.
When set to On without Pre-boot Measurements, the
system reports the TPM to the operating system and
bypasses pre-boot measurements.
Changes the operational state of the TPM.
When set to Activate, the TPM is enabled and activated
at default settings.
When set to Deactivate, the TPM is disabled and
deactivated.
The No Change state initiates no action. The operational
state of the TPM remains unchanged (all user settings for
the TPM are preserved).
NOTE:
This field is read-only when TPM Security is set
to Off.
Information Update
21